1. Take your cushion and remove any outer decorative case or extra protector. Pop those into the washing machine at the same time.
2. Put the whole cushion into the washing machine and wash on a wash cycle at up to 60℃.
3. Open the zip slightly, leaving the inner zip flap in place. Tumble dry: med-hot temperature is best (or line dry it if you want).    You may need to move the fill around part way through for it to completely dry.   Air it for half an hour or so afterwards.
4. If you have any problem with the fill not drying properly, remove the fill from the cushion case and place it in a laundry/mesh wash bag to dry it.
5. When the fill and case are completely dry, put the fill back in the case, making sure the flap sits under the zip before you close the zip.
6. Plump your cushion into shape and pop your cushion cover back on.

Tip:

If you would prefer not to wash your whole cushion, use a MiteGuard® cushion cover for an extra layer of barrier fabric, then wash the cushion cover every 2-3 months.